Machine status and advanced features_ 65DIRECT USBYou can use USB memory with your machine (see "Using USB memorydevice" on page 60).JOB MANAGEMENTThis menu item is available when the optional memory or hard disk drive(HDD) is installed (see "Printing with the optional memory or hard disk drive"on page 102).ADMIN SETUPITEM DESCRIPTIONPassword Protect You can set the password to access the AdminSetup menu. Select On to use this option andenter the passwordChange Password You can change the password for accessing theAdmin Setup.Maintenance This menu allows you to maintain your machine.• Clean Fuser: Cleans the fuser by printing asheet. The printed sheet has toner debris onit.• CLR Empty Msg.: Prevents the TonerLowAlert message from appearing on the dis-play.• Supplies Info.: This item allows you tocheck how many pages are printed and howmuch toner are left in the cartridge.• TonerLow Alert: If toner in the cartridgehas run out, a message informing user tochange the toner cartridge appears. You canset the option for this message to appear ornot.• Ram Disk: You can enable/disable RAMdisk to manage jobs. Depending on theinstalled optional memory size, you can setthe RAM disk size between 32 and 64 MB.This option does not appear if you haveinstalled hard disk drive (HDD).Reboot the machine to apply thechange.Clear Settings This menu performs a simple reset and restoresthe factory default settings for the network configu-ration. This setting will only take effect after youhave reset the printer.Network Configu-rationThis menu allows you to print a page showing thenetwork parameters you set.Net. Activate You can set to use Ethernet on or off.Http Activate You can set to use SyncThru™ Web Service ornot. If you set this option to “off”, users cannotaccess SyncThru™ Web Service.a. This menu only appears when an optional wireless network interfacehas been installed.ITEMS DESCRIPTION ITEM DESCRIPTION
