Samsung PS50C430 User Manual

Also see for PS-42C430: User manual Quick start guide User manual

Contents

16 EnglishBasic Features■ MPEG Noise Filter (Off / Low / Medium / High /Auto): Reduces MPEG noise to provide improvedpicture quality.■ HDMI Black Level (Normal / Low): Selects the blacklevel on the screen to adjust the screen depth.✎ Available only in HDMI mode (RGB signals).■ Film Mode (Off / Auto1 / Auto2): Sets the TV toautomatically sense and process ilm signals from allsources and adjust the picture for optimum quality.✎ Available in TV, AV, COMPONENT (480i / 1080i)and HDMI (480i / 1080i).■ Screen Burn Protection: To reduce the possibility ofscreen burn, this unit is equipped with screen burnprevention technology. The Time setting allows you toprogramme the time between movement of the picturein minutes.Pixel Shift (Off / On): Using this function, you canminutely move pixels on the PDP in horizontal or verticaldirection to minimize after image on the screen.✎ Optimum condition for pixel shiftItem TV/AV/Component/HDMIHorizontal 0~4 4Vertical 0~4 4Time (minute) 1~4 min 4 min✎ The Pixel Shift value may differ depending on themonitor size (inches) and mode.✎ This function is not available in the Screen Fitmode.Auto Protection Time (10 min / 20 min / 40 min /1 hour / Off): If the screen remains idle with a stillimage for a certain period of time deined by the user,the screen saver is activated to prevent the formation ofghost images on the screen.Scrolling: This function removes after-images on thescreen by moving all the pixels on the PDP accordingto a pattern. Use this function when there are remainingafter images or symbols on the screen, especially whenyou displayed a still image on the screen for a long time.✎ The after-image removal function has to beexecuted for a long time (approximately 1 hour)to effectively remove after-images on the screen.If the after-image is not removed after performingthe function, repeat the function again.✎ Press any key on the remote control to cancel thisfeature.Side Grey (Dark / Light): When you watch TV with thescreen ratio set to 4:3, the screen is prevented from anydamage by adjusting the white balance on both extremeleft and right sides.Picture Reset (OK / Cancel)Resets your current picture mode to its default settings.Sound Menu¦ Changing the Preset Sound ModeMode■ Standard: Selects the normal soundmode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound formovies.■ Clear Voice: Emphasizes voices overother sounds.■ Amplify: Increase the intensity of high-frequency soundto allow a better listening experience for the hearingimpaired.¦ Adjusting Sound SettingsEqualizerAdjusts the sound mode (standard sound mode only).■ Balance L/R: Adjusts the balance between the right andleft speaker.■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (BandwidthAdjustment): Adjusts the level of speciic bandwidthfrequencies.■ Reset: Resets the equalizer to its default settings.¦ Sound Systems, Etc.Virtual Surround (Off / On)(standard sound mode only)This function provides a virtual 5.1 channel surround soundexperience through a pair of speakers or headphones usingHRTF (Head Related Transfer Function) technology.S.MODE