Settings 79Activating Voice Service1. Press and hold .The phone prompts you to “Say a command.”– or –Press MENU ➔ Tools + Settings ➔ Tools ➔Voice Service.2. Wait for the beep and then clearly say one ofthe following commands:• Call • Send Message • Lookup • Go To • Check Upon recognition of a command, the phone takes thecorresponding action. If the phone does not hear acommand within approximately eight seconds, itprompts with “Please try again. Say a command.Sorry command not recognized, try again?”3. Press Yes to try again and say the command.– or –Press No to cancelVoice Command Tutorial Press Tutorial for a brief overview on how touse the Voice Service option.Voice Service Settings Press Settings for the following options:ConfirmationYou can control how often the system asks you toconfirm the recognized name or number.1. Press and hold .The phone prompts you to “Say a command.”– or –Press MENU ➔ Tools + Settings ➔ Tools ➔Voice Service.2. Press Settings3. Select Confirmation and press .4. Select one of the following options andpress .• Automatic: the system asks for confirmation if it isnot sure of what you said.• Always Confirm: the system always asks forconfirmation.• Never Confirm: the system always uses its bestguess as to what you said and never asks forconfirmation.AdaptationYou can adapt the system to your voice for optimalrecognition accuracy.Training the phone to recognize your voice takesapproximately three minutes and you should use aquiet room while saying each word or digit needed totrain the phone.