152VPNSet up and manage Virtual Private Networks (VPNs). For moreinformation about using VPNs, see “VPN” on page 131Adding a VPN1. From the Settings screen, touch Connections➔ More settings ➔ VPN.2. Touch Add VPN network to set up a connection to aVPN, using the following settings:• Name: Enter a name for the VPN connection.• Type: Choose the type of VPN.• Server address: Enter the IP address of the VPN server.• PPP encryption (MPPE): Touch to enable or disableencryption.• Show advanced options: Touch to show more options.Available options depend on the type of VPN you are adding.Note: You must enable at least Pattern security before settingup a VPN. If you have not yet enabled security, you’ll beprompted to do so the first time you launch VPNsettings.NFCUse NFC (Near Field Communication) to share informationbetween your phone and another NFC device by touching thedevices together, typically back-to-back.For more information about sharing information with NFC, “SBeam” on page 153.1. From the Settings screen, touch Connections.2. Under Connect and share:• Touch the NFC slider to turn NFC On.• Touch the NFC slider to turn NFC Off.Note: NFC must be turned on to use S Beam.DRAFTFOR INTERNAL USE ONLY
