SCANNING6.12Setting Network Scan TimeoutIf Network Scan on your computer does not send a refreshrequest and does not scan a job within the timeout periodconfigured in Network Scan, the entry your machine returns tothe Standby mode.To set the Network Scan timeout option:1 Press Menu until “Machine Setup” appears on the top lineof the display.2 Press the scroll buttons until “Scan Timeout” appears onthe bottom line and then press Enter.3 Enter the desired timeout value and press Enter.The default value is 30 minutes. Users can enter any valuefrom 1 minute to 1,440 minutes.4 The change will be broadcast over the network andeffective to all clients connected to the network.
