xviiEuropean Radio Approval Information(for products fitted with EU-approved radio devices)This Product is a printer; low power, Radio LAN type devices (radio frequency (RF)wireless communication devices), operating in the 2.4 GHz band, may be present(embedded) in your printer system which is intended for home or office use. Thissection is only applicable if these devices are present. Refer to the system label toverify the presence of wireless devices.Wireless devices that may be in your system are only qualified for use in theEuropean Union or associated areas if a CE mark with a Notified BodyRegistration Number and the Alert Symbol is on the system label.The power output of the wireless device or devices that may be embedded in youprinter is well below the RF exposure limits as set by the European Commissionthrough the R&TTE directive.European States qualified under wireless approvals:EU Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia,Finland, France (with frequency restrictions), Germany, Greece,Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, TheNetherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Swedenand the U.K.Outside EU Iceland, Liechtenstein, Norway and SwitzerlandEuropean States with restrictions on use:EU In France, the frequency range is restricted to 2446.5-2483.5 MHzfor devices above 10 mW transmitting power such as wirelessOutside EU No limitations at this time.Regulatory Compliance StatementsWireless GuidanceLow power, Radio LAN type devices (radio frequency (RF) wireless communicationdevices), operating in the 2.4 GHz Band, may be present (embedded) in your printersystem. The following section is a general overview of considerations while operatinga wireless device.Additional limitations, cautions, and concerns for specific countries are listed in thespecific country sections (or country group sections). The wireless devices in yoursystem are only qualified for use in the countries identified by the Radio ApprovalMarks on the system rating label. If the country you will be using the wireless devicein, is not listed, please contact your local Radio Approval agency for requirements.Wireless devices are closely regulated and use may not be allowed.The power output of the wireless device or devices that may be embedded in yourprinter is well below the RF exposure limits as known at this time. Because thewireless devices (which may be embedded into your printer) emit less energy than is
