PAPER HANDLING3.86 If you want the machine to stack the printed pages on therear output slot, open the rear door to use the rear outputslot.CAUTION: Make sure to open the rear output slot when you printon transparencies. If not, they may tear while exiting the machine.7 After printing, fold away the paper support extension andclose the Multipurpose tray.Using the Manual Feed ModeYou can manually load a sheet of print material in theMultipurpose tray if you select Manual Feed in the Sourceoption from the Paper tab when you change print settings toprint a document. For details about changing print settings, seepage 4.6. Manually loading paper can be helpful when you wantto check the print quality after each page is printed.This loading procedure is almost the same as the procedure forloading in the Multipurpose tray, except you load paper sheet-by-sheet in the tray, send print data to print the first page, andpress Enter on the control panel to print each following page.1 Lower the Multipurpose tray and unfold the paper supportextension.2 Load a sheet of print material with the side to be printedon facing up.
