G ETTING STARTED 2.2525 Press Enter to save the selection.6 To return to Standby mode, press Stop/Clear.Scan Lamp Save ModeScan Lamp Save mode allows you to save the scan lamp. Thescan lamp under the document glass automatically turns offwhen it is not in actual use to reduce power consumption andextend the life of the lamp. The lamp automatically wakes upafter some warm-up time when you start scanning.You can set the length of time for which the scan lamp waitsafter a scan job is completed before it switches to the powersave mode.1 Press Menu until “Machine Setup” appears on top line ofthe display.2 Press the scroll button ( or ) until “Scan PWR Save”appears on the bottom line. Press Enter.3 Press the scroll button ( or ) until the time setting youwant appears on the bottom line.The available time options are 0.5, 1, 4, 8, and 12 (hours).4 Press Enter to save the selection.5 To return to Standby mode, press Stop/Clear.
