U SING USB FLASH D RIVE 10.71011 Press Enter.12 If you selected “BMP” in step 10, you are asked to select acolor format, Color, Gray, or Mono, by pressing the scrollbutton ( or ).If you selected “PDF” in step 10, you are asked to select acolor format, Color, or Mono, by pressing the scroll button( or ). You can save a multiple-page document as asingle file, the machine displays “Multi Page” and offers youthe choice of “On” or “Off.” If you select “On” you can savemultiple pages as a single file, but this feature is onlyactivated when you load your document into the ADF. TheADF can handle documents of up to 50 pages at a time.If you selected “TIFF” in step 10, you can save a multiple-page document as a single file. After you select “TIFF”, themachine displays “Multi Page” and offers you the choice of“On” or “Off.” If you select “On” you can save multiplepages as a single file, but this feature is only activatedwhen you load your document into the ADF. The ADF canhandle documents of up to 50 pages at a time.13 Press Enter to make your selection.14 To return to Standby mode, press Stop/Clear.Deleting an Image FileTo delete an image file that you scanned and saved on the USBflash drive:1 Make sure that the USB flash drive is inserted into the USBport in front of the machine. If necessary, insert the USBflash drive. See page 10.2.2 Press Scan-to on the control panel.The first available menu item, “USB Memory,” appears onthe bottom line of the display.3 Press Enter. The display shows the available memoryspace for about 2 seconds and the first available menuitem, “Auto Scan,” appears on the bottom line of thedisplay.
