F AXING (SCX-4720F/4720FS O NLY ) 7.117Sending a Fax Automatically1 Load the document(s) face up into the ADF.ORPlace a single document face down on the document glass.For details about loading a document, see page 7.6.2 Adjust the document resolution to suit your fax needs (seepage 7.9).If you need to change the darkness, see page 7.3.3 Enter the remote fax phone number using the numberkeypad.You can use one-touch keypad, speed dial, or group dialnumbers. For details about storing a number, see“Automatic Dialing” on page 7.19.4 Press Start.5 When a document is placed on the document glass, thedisplay shows “Another Page?” on the top line after thedocument is scanned into the memory. If you have the nextpage, remove the scanned page and place the next page onthe glass and select “1.Yes.” Repeat as necessary.After all of the pages are scanned, select “2.No” when thedisplay shows “Another Page?.”6 The number is dialed and then the machine begins sendingthe fax when the receiving fax machine is ready.NOTE: When you want to cancel a fax job, press Stop/Clear atany time while sending.
