3.27MaintenanceCartridge AlignmentYou should print the alignment pattern if vertical lines or characters appearcrooked. The alignment printing lets you straighten the vertical lines.On Your SF4500 Series Machine Control Panel:1. Press Menu, then press System Setup on the One-Touch keypad.2. Press † or π repeatedly, until the display shows ‘ARRANGEALIGNMENT?.’3. Press Enter. Alignment pattern is printed.4. Examine the printed pattern, and select the closest straight line for DraftMode and Normal Mode.5. Press the straight (or the closest) line number for Draft mode when thedisplay prompts you to enter number for DRAFT ALIGNMENT.6. The display prompts you to enter number for NORMAL ALIGNMENT.Press the straight (or the closest) line number for Normal Mode.7. The display asks if you want to repeat alignment. If there are no linesstraight, press 1 to select YES, and repeat the procedure until you get astraight line.8. When alignment is complete, press 2 to select NO when the displayshows ‘REPEAT ALIGNMENT.’ The machine returns to Standby mode.3 Troubleshooting1 2 3 4 51 2 3 4 5A - Draft Mode AlignmentB - Normal Mode Alignment
