1.14 Set Up Your Machine3. Press Enter. The display asks you to choose the resolution or contrast.4. Press 1 to choose ‘RESOLUTION.’ 2 for ‘CONTRAST’. You can alsochoose the mode by pressing † or π and Enter. The display shows thecurrent mode.5. Press √ or ® repeatedly until you find the desired mode.HOME RESOLUTION•STANDARD – use with most documents.•FINE – default resolution settings and should be used for documentswith fine detail, or small print.•SUPER FINE – originals with extremely fine detail.HOME CONTRAST•NORMAL – use with documents of average or normal contrast.•DARKEN – use with documents with low contrast or light images.•LIGHTEN – use with documents with high contrast or dark images.•PHOTO – for obtaining maximum image quality with documents thatcontain pictures or photographs with shades of grey.6. Press Enter. The display asks you to choose RESOLUTION orCONTRAST.7. If necessary, repeats steps 4 and 5. To return to Standby Modepress Stop.Adjusting Speaker Volume1. Press OHD to adjust the speaker volume. If you cannot hear dial tone,check the phone line connection.2. Press† or π repeatedly until you find the desired loudness. Thedisplay shows the current volume level.3. After choosing the desired volume level, press OHD.1.RESOLUTION2.CONTRAST
