2.20 Receiving a FaxReceiving Automatically in Fax Mode1. Press Rcv.Mode until the Fax lamp lights.2. When you get a call, the machine answers the call on the second ringand receives a fax automatically. You can change the number of rings.See ‘ANSWER ON RING’ on page 2.56.To adjust the Ringer Volume, press Menu, System Setup on the One-Touch keypad, Start to access Ringer Volume mode, then use π or †tochoose the desired loudness.Receiving Automatically in Tel/Fax Mode1. Press Rcv.Mode until the Tel/Fax lamp lights.2. When you get a call, the machine answers the call on the second ring.You can change the number of rings. See page 2.56.3. If a fax is being sent, the machine goes into receives a fax automatically.If the machine does not sense a fax signal, it will give another ringingtone to tell you it is a phone call.4. Lift the handset to answer the call. If you do not pick up the handsetwithin a specified time, the machine will switch back to automatic faxreception mode.
