2.27MyScanPreferencesThis option allows you to setup some pre-scanning conditions.Setting the PreferencesSelect Preferences from the Settings menu. The Preferences dialog box willappear as follows:From the dialog box, confirm or change the following settings:Keep preview imageSelection of this check box causes the preview image which was createdfrom the last preview, to be re-displayed the next time MyScan is started.Keep current settingsSelection of this check box causes all selections and control settings whichwere in effect at the time of the last scan to be retained and re-establishedthe next time MyScan is opened. If Keep Current Settings is not checked,then the factory preset selections and settings will appear the next timeMyScan is opened. (Factory preset selections and settings may also beobtained at any time by choosing Reset Settings in the Settings menu.)Preview with current settingsSelection of this check box allows you to preview an image which showsthe effects of all of the MyScan pre-scan options you have selected for thatimage.Scan Quality feature is not available for SF4500 Series.
