Samsung SVMi-8 Technical Manual

Also see for SVMi-8: Quick reference guide Frequently asked questions

Contents

Menu BlockDescriptionThe Menu is used to speak something to the caller, collect a caller's DTMF entry, and pass control to another Block.A menu can accept entries from 1 to 10 digits in length.The Menu performs a search operation to match the caller ENTRY. For example, a Menu prompt may be, "You maydial an extension directly or for sales press 1, for service press 2". If the caller presses 1, a pointer with an Inputvalue of <1> directs the caller to an extension group within the phone system called "SALES." If the caller entered223, the MENU may be configured to search for an extension or mailbox.When a match is found, the SVMi-8 looks to see if it should translate the imput into a new value before performingthe search. SVMi-8 then transfers control to Block defined in the target name field. This is all done in the in theMenu Input Processor.Menu The name of this block. A Block name can be any alphanumeric string up to 16 characters long (includingspaces). A Block name may not be the same as another Block name.Input Processor Operating ParametersTake INPUT from (ENTRY, KEY ,CID, FwdID, TRUNK) - The value which SVMi-8 uses to search INPUT values in theinput processor on Page 2 of 4. To change this value, press ENTER at this field for a pick list of values. Go to thedesired entry and press ENTER.ENTRY If a MENU is expecting DTMF digits from the caller, this should be set to ENTRY.CID, FwdID, TRUNK These are used in the menu blocks that handle system integration (Direct Station andTrunk and Forward Station and Trunk). These should not be changed.Block Types and Descriptions74MMeennuu BBlloocckkPage 1 of 4