Samsung WEC8500 Operation Manual

Also see for WEC8050: Operation manual Operation manual Operation manual Operation manual Maintenance manual

Contents

CHAPTER 6. Wi-Fi Configuration© SAMSUNG Electronics Co., Ltd. page 282 of 68911) Configure the bandwidth of the AP. Bandwidth can be configured only for 80211a/n/ac. bandwidth [BANDWIDTH] ap [AP_ID]: Bandwidth is configured for a specific AP. bandwidth [BANDWIDTH] global: Bandwidth is configured for all APs. Bandwidth [BANDWIDTH] group [GROUP_ID] all-ap/active-ap: Bandwidth isconfigured for multiple Aps in the group.Parameter DescriptionBANDWIDTH - 20: 20 MHz- 40: 40 MHz- 80: 80 MHz- 160: 160 MHz (to be supported in the future)- 8080: 80 + 80 MHz (to be supported in the future)AP_ID ID of the AP (range: 1-3000)GROUP_ID ID of the AP groupall-ap Applies to all APs in the groupactive-ap Applies to all live APs in the groupConfiguration using Web UIIn the menu bar of , select <CONFIGURATION> and then selectthe <ACCESS POINTS>  <802.11a/n> or <802.11b/g/n> menu in the sub-menus.An example of selecting 802.11a/n is shown below.Figure 155. 802.11a/b/g/n radio (1)The configuration items are as follows:[AP Service Configuration] SERVICE: Enable or disable the radio service.