CHAPTER 10. System Management© SAMSUNG Electronics Co., Ltd. page 525 of 68910.12.9 Statistics FunctionIt provides the statistics calculation function for statistics for group optimization.It collects statistics for each statistical item by AP/radio, radio, WLAN (SSID), device type,and RF and again by time interval. The time intervals include 5 minutes, one hour, and 24hours and the statistical value calculated by time is displayed when the statistics items areretrieved in WEC and CLI.VoIP StatisticsIt shows relevant statistics if VoIP is used with the SIP FMC terminal.Configuration using CLI1) Enable VoIP Statistics.WEC8500/configure/network-stats/statistics/voip# enable2) If the call setup, call drop, and MoS values of specific APs are monitored for aspecific time and such values fail to reach the reference values, an event can begenerated.ex.) call-setup: If the call setup success rate is less than 50 %, an event is generated.../network-stats/alert/voip/call-setup# enable../network-stats/alert/voip/call-setup# threadhold 503) Retrieve the status of configuration of the VoIP statistics.WEC8500# show network-stats statistics voip configuration4) Retrieve the status of configuration of the VoIP alert.WEC8500# show network-stats alert voip configuration5) Retrieve call statistics by radio.WEC8500# show network-stats statistics voip radio6) Retrieve call statistics by AP.WEC8500# show network-stats statistics voip ap
