15SETTING THE SLEEP TIMERThe Sleep Timer will switch off the TV automatically.1. Press the SLEEP key.2. Use the 0 key to select the desired time(from 30 minutes up to 3 hours).Note: The Sleep Timer cancels when the TV is turnedoff or if a power failure occurs. Sleep : 0:30Use 0 keySleep : 1:00Sleep : 1:30➧Sleep : 2:00Sleep : 2:30Sleep : 3:00Sleep : Clear2 3147 8095 6INPUTCAPTION SLEEPMENU RECALLPOWER RESETDVD SAT AUXVCR TV CABLE❶❷USING THE COMPONENT VIDEO AND AUDIO(AV2) IN JACKSCONNECTING A DVD OR OTHER DIGITAL EXTERNAL EQUIPMENTSwitch off TV and external equipment before connecting cables. (Cables are not supplied.)1. Connect a DVD or other digital equipment’s Component Video Out to the TVComponent Video In (Y-Pb-Pr) Jacks ❶.2. Connect the DVD’s Audio Out to the TV AV2 Audio In (L/R) Jacks ❷.3. Press POWER ❸ to turn on the TV. Turn on external equipment also.4. Press the INPUT ❹ key to select Component 2.QuickTips Always match cablesaccording to thecolors. You may be ableto use the TV remotecontrol to operateyour DVD.(See pages 7~9.) A solid Blue screenwith the wordComponent 2displayed means thatthis Video mode isselected, but no signalis being detected atthe Component jacks.Check connections,and turn on externalequipment.Need help?Visit our Web site atwww.sanyoctv.comor Call 1-800-877-5032UHF/VHF/CATV75ΩVIDEO AUDIO INPUTCOMPONENT AV2 AV1S-VIDEOVIDEO(MONO)AUDIORLRRLLYP bP rAUDIOOUTPUTANT.INY PB PRRL AUDIOVIDEO COMPONENT VIDEO OUTS-VIDEO OUTA/V OUTDVD Player❶INPUT POWER RESETDVD SAT AUXVCR TV CABLE❹Remote Control❸TV Component Video(Y-Pb-Pr) Jacks❷