CARE AND CLEANINGThe surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays, cleaningagents, solvents and polishes will cause permanent damage to the fine surface.1. Unplug the power cord before cleaning the television.2. Clean the screen and cabinet with a soft dry cloth.Note: Never spray liquids on the screen because they can run down and drip onto the chassis.This may cause component failure not covered under Warranty.21This symbol on the nameplate means the product is Listed by Underwriters’Laboratories Inc. It is designed and manufactured to meet rigid U.L. safetystandards against risk of fire, casualty and electrical hazards.The cabinet makes a popping soundThis is a normal condition during the warm-up and cool down of the plastic cabinet parts.Does the remote control work now?Yes. Another mode was selected. Press the appropriate key to operate the differenttypes of equipment. (Remote must be programmed. See pages 7~9.)No. Replace the batteries or confirm that they are properly installed.My remote control will not operate my TelevisionPress the TV keyon the RemoteControl. Then try itagain. Be sure topoint the remotecontrol at the TV.Does the remote control operate the equipment now?Yes. Another mode was selected. Press the appropriate button to operate thedifferent types of equipment. (Remote must be programmed. See pages 7~9.)No. Reprogram the remote control.My remote control will not operate my VCR, Cable Box, DVD, or SatelliteReceiverPress the appropriatekey: VCR, CABLE,DVD, or SAT key on theRemote Control. Thentry it again. (Makesure the equipment isturned on.)