|
SEARCHING FOR RECORDED VIDEO530 EnglishOPERATIONUse the following procedure to playback video that hasbeen stored in the archive area.1 Press the [SEARCH] button while thedigital video recorder is recording orstopped.The SEARCH indicator lights up and the screen is displayed.2 Turn the jog dial to select “ARCHIVEAREA SEARCH”.3 Turn the shuttle dial clockwise.The screen is displayed.This screen lists the eight most-recent recordings in theorder in which archiving was performed.(1) NO: Indicates the archive number.(2) DATE: Indicates the date of recording.(3) START: Indicates the start time for the recording.(4) CH: Indicates the channel (or camera number) for therecording.(5) TOTAL: Indicates the total capacity of the archivearea.(6) USED: Indicates the amount of the archive area thathas been used.4 Turn the jog dial to select the video forplayback.The selected image is displayed on the preview screen.z To display the next or previous recordingTurn the jog dial clockwise or counter-clockwiseaccordingly.z Up to eight recordings can be displayed in the screen.z To leave search modePress the [SEARCH] button. SEARCH indicator turns off.5 Turn the shuttle dial clockwise.The selected recording is played back on the full screen.By setting the motion sensor for recordings from thenormal recording area (i.e., normal recordings and timerrecordings) or alarm recording area, variations from theserecordings as a result of the presence of an intruder or thelike can be detected, and the corresponding video can beplayed back.z When a camera number (or channel) is specified,searching will only be carried out for that camera.1 Press the [SEARCH] button while thedigital video recorder is recording orstopped.SEARCH indicator lights and screen isdisplayed.Archive area searchSEARCH(5)(6)(1) (3)(2) (4)Motion detection searchSEARCH
|
