Sanyo DSR-3506 Instruction Manual

Also see for DSR-3506: Service manual Quick guide

Contents

Sanyo DSR-3506 Instruction Manual Manual pdf 76 page image

RECORD SET3English 751 Turn the jog dial to select “MAIN MON.DISPLAY”, and then turn the shuttle dialclockwise.“FULL” starts to flash for “MAIN MON. DISPLAY”.[Settings] ( indicates the default setting)2 Turn the jog dial to set “MAIN MON.DISPLAY”, and then turn the shuttle dialclockwise.The cursor moves to “ALARM PRIORITY”.3 Turn the shuttle dial clockwise and turnthe jog dial to set “ALARM PRIORITY”,and then turn the shuttle dial clockwiseonce again.The cursor moves to “MON.2 DISPLAY”.[Settings] ( indicates the default setting)z After an alarm duration has ended, the display returnsto the screen prior to alarm input.4 Turn the shuttle dial clockwise and turnthe jog dial to set “MON.2 DISPLAY”(ON/OFF), and then turn the shuttle dialclockwise.The cursor moves to “ALARM RETRIGGER”.[Settings] ( indicates the default setting)5 Press the [EXIT] button.The setting procedure is ended and the display returns tothe normal screen.To forcibly cancel an alarm during alarm operation, pressthe [CAMERA SELECT] button for the camera inputtingthe alarm and hold it for approximately 3 seconds.Alternatively, connect a switch between the alarm resetterminal and C (the grounded terminal), and turn on theswitch to cancel any alarm that is occurring.Setting alarm displaySetting DescriptionFULLWhen an alarm is detected, the video on thechannel containing the alarm is displayed in fullscreen format on the main monitor.6 When an alarm is detected, a multi-6 screendisplay is presented on the main monitor.NC The main monitor’s display does not change whenan alarm is detected.Setting DescriptionLAST When a number of alarms are occurring, the most-recent alarm video is given priority.FIRSTWhen a number of alarms are occurring, only thevideo for the first alarm is displayed. However, ifthe duration for the alarm with the first inputexpires, video for the next alarm will be displayed.SWITCHWhen a number of alarms are occurring, thedisplay switches between the video from thecorresponding cameras, showing each for onesecond.Setting DescriptionON When an alarm occurs, the corresponding video isdisplayed on the monitor 2.OFF No alarm video is displayed on the monitor 2.Canceling alarmsEXITCALARMRESET