RECORD SET360 EnglishSETTINGS2 Turn the jog dial to select “2.RECORDING AREA SET” from the screen, and then turnthe shuttle dial clockwise.The screen is displayed.3 Turn the jog dial to select “AREA FULLRESET”, and then turn the shuttle dialclockwise.“NO” on the screen flashes4 Turn the jog dial to select “YES”, andthen turn the shuttle dial clockwise.“NORMAL RECORDING AREA” is set to the singleoverwrite condition.5 Use the same procedure to makesettings for the “ALARM RECORDINGAREA”.6 Press the [EXIT] button.The setting procedure is ended and the display returns tothe normal screen.z To perform overwriting automatically, set“OVERWRITE” for either “NORMAL RECORDINGAREA” or “ALARM RECORDING AREA” from screen to “ON”.(JP.60)z Whenever “AREA FULL RESET” is performed for“NORMAL RECORDING AREA” or “ALARMRECORDING AREA”, the video recorded in thecorresponding area will be overwritten.z Images in the archive area are erased when “AREAFULL RESET” is performed for the archive area.Use the following setting procedure to indicate whetheroverwriting is to be performed (deleting old video) orrecording is to be stopped when any of the hard disk’srecording areas become full. In the latter case, theremaining capacity is shown as a percentage on theoperation display area.1 Turn the jog dial to select“OVERWRITE” for normal recordingarea, and then turn the shuttle dialclockwise.“ON” flashes.FlashingSetting recording conditionsSetting normal recording area overwriting anddisplaying the remaining capacity on theoperation display areaEXIT
