GENERAL SET4English 813 Press the [EXIT] button.The setting procedure is ended and the display returns tothe normal screen.1 With the normal monitoring screendisplayed, press the [SHUTTLE HOLD]button for approximately 3 seconds.The LOCK indicator on the front panel lights up and abuzzer sounds to indicate activation of the security lock.2 To confirm activation of this function,press the [MENU] button.A password entry screen appears for about 5 seconds.3 Enter your password while thepassword entry screen is displayed.Use the jog dial and the shuttle dial to perform thisprocedure.z Enter the password set for administrators or users(such as “123456AB”).Be sure to enter the correct password for the operation(s) to be carried out. (JP.79)4 Turn the shuttle dial clockwise.The security lock is cancelled and the display returns tothe normal screen.z If an administrator password was entered, the securitylock is cancelled and the indicator is turned off.z If a user password was entered, the security lock ispartially cancelled and the indicator remains lit.This section describes how to initialize and expand thehard disk.When a single hard disk is installed, the hard disk capacityis displayed for DISK 1; when two hard disks are installed,the capacity is displayed for “DISK 1” and “DISK 2”.1 Press the [MENU] button and turn thejog dial to select “3. GENERAL SET”,and then turn the shuttle dial clockwise.The screen is displayed.2 Turn the jog dial to select “4. HDD SET”,and then turn the shuttle dial clockwise.The screen is displayed.The cursor moves to “DISK INITIALIZE”.Setting the security lockCanceling the security lockEXITLOCK indicator[SHUTTLE HOLD] buttonSHUTTLE HOLDSetting and initializing the hard diskInitializing the hard diskMENU
