RECORD SET3English 57The following settings are carried out using the shuttledial and jog dial.z Vertical cursor movement: Turn the jog dial.z Cursor movement to the right: Turn the shuttle dialclockwise.z Modification of values: Turn the shuttle dial clockwise,and then with the setting value flashing, turn the jogdial.z Confirmation of values: Turn the jog dial clockwise.9 Set “PICTURE QUALITY”.See P.5510 Set “AUDIO RECORDING”.See P.5511 Turn the shuttle dial counter-clockwise. screen is displayed.12 Turn the jog dial to select “YES”, andthen turn the shuttle dial clockwise.The display returns to the screen.13 Press the [EXIT] button.The setting procedure is ended and the display returns tothe normal screen.z The recording rate is automatically calculated based onrecording settings and the number of connectedcameras, and this is indicated by “RECORDINGDURATION”. If a valid figure cannot be calculated,“ERROR!” will be displayed.z When simple recording settings and individual settingsare both set, the most recent settings override previoussettings.z Easy setup settings cannot be used with programrecording or day-specific timer recording.Use the following procedures to confirm the hard disk’stotal recording capacity and also the allocation for eachrecording area.1 Press the [MENU] button.The MENU indicator lights up and the isdisplayed.2 Turn the jog dial to select “2.RECORDSET”, and then turn the shuttle dialclockwise.The screen is displayed.3 Turn the jog dial to select “2.RECORDING AREA SET”, and then turnthe shuttle dial clockwise.The screen is displayed.EXITDisplaying the recording areas(1) Displays the total capacityof the hard disk.(2) Sets the capacity of thenormal recording area.(3) Sets the capacity of thealarm recording area.(4) Sets the capacity of thearchive area.MENU(1)(2)(3)(4)NormalrecordingareaAlarmrecordingareaArchive area
