Sanyo DSR-3506 Instruction Manual

Also see for DSR-3506: Service manual Quick guide

Contents

Sanyo DSR-3506 Instruction Manual Manual pdf 59 page image

RECORD SET358 EnglishSETTINGSTotal capacity following hard disk expansion.When “MIRRORING” (JP.82) is set using “4. HDD SET”,the total capacity display will change as follows.z If “MIRRORING” is “OFF”, the capacity for hard-diskexpansion is displayed.z If “MIRRORING” is “ON”, the capacity of the smallesthard-disk is displayed.z The setting for the archive area cannot be modifieddirectly.When changes are made for the normal recording areaor the alarm recording area, automatic settings will bemade within a maximum range of 10 GB. Default hard disk settingsBy default, the normal recording area is set to 80%; thealarm recording area is set to 19%; and the archivearea is set to 1%. The maximum capacity of the archivearea is 10 GB.z When the recording area settings are changed, the diskis initialized and all current recordings are erased. It isimportant, therefore, to store recorded video on a PC orsome other storage media before modifying recordingareas. Recording area allocationsThe highest possible allocation for the normal recordingarea and the alarm recording area is 99%.The allocation for the archive area cannot be setmanually.This allocation will be automatically set to atleast 1%. If the normal recording area is set to 0%If set to 0%, it will not be possible to record video to thenormal recording area. As video will only be recorded tothe alarm recording area in this type of case, the areaallocations should be reviewed and set accordingly.z If the normal recording area is set to “0%”, the [PLAY/STOP] button will be deactivated. In such a case,search playback should be carried out.z A maximum of 16,000 alarm recordings can be madeon one hard disk. If hard disk expansion is carried out,this number can be increased to 32,000. Note,however, that menu settings and display content willhave an effect on the maximum number of recordingsthat can be made in reality.z When the normal recording area is set to “*0%”Alarm recording can be performed for as long as spaceis left in the alarm recording area.When searching for video, this area can be searched inthe same way as the normal recording area using time/date searches, fast-forward play, and fast-reverse play.Alarm search, alarm thumbnail search, motion detectionsearch, and alarm skip will not be available.Example:Setting the normal recording area to 50% and thealarm recording area to 49%1 Turn the jog dial to select the “NORMALRECORDING AREA”, and then turn theshuttle dial clockwise.“80%” flashes.2 Turn the jog dial to set “NORMALRECORDING AREA” to 50%, and thenturn the shuttle dial clockwise.The cursor moves to “ALARM RECORDING AREA”.Changing recording areasCAB1%1%80%80%1%80%19%AlarmrecordingareaArchive areaNormal recordingareaHard Disk Recording Areas