|
SEARCHING FOR RECORDED VIDEO528 EnglishOPERATIONUse the following procedure to search and playback allvideo stored in the alarm recording area. If pre-alarm videois being recorded, playback will start from immediatelybefore the alarm.1 Press the [SEARCH] button while thedigital video recorder is recording orstopped.The SEARCH indicator lights up and the screen is displayed.2 Turn the jog dial to select “ALARMSEARCH”, and then turn the shuttle dialclockwise.The screen is displayed.This screen lists the eight most-recent alarm recordings.(1) NO:Indicates the alarm number.(2) DATE/TIME:Indicates the date and time at which the alarm videowas recorded.(3) CH:Indicates the alarm video’s channel (or cameranumber).(4) TOTAL ALARMS:Indicates the total number of alarm video recordings.(5) Preview:Displays the selected alarm video.3 Turn the jog dial to move the cursor andselect the video for playback.A preview of the selected alarm video is displayed in thepreview screen. In this case, the video from the instant ofalarm occurrence is displayed.z To display the next or previous recordingTurn the jog dial clockwise or counter-clockwiseaccordingly.z To leave search modePress the [SEARCH] button. SEARCH indicator turnsoff.4 Turn the shuttle dial clockwise.The selected recording is played back in full screen mode. To view pre-alarm videoAfter beginning playback of an alarm recordingidentified by an alarm search, use the shuttle dial toreverse playback.1 Press the appropriate [ALARM] buttonduring playback.z Each time the “ ” button is pressed, playback willskip to the preceding alarm video recording.z Each time the “ ” button is pressed, playback willskip to the subsequent alarm video recording.Alarm searchSEARCH(5)(1) (2) (3) (4)To view alarm video before or after the currentplayback01-01-04 00:00:00 EN A ALARM 00000201-01-04 00:00:00 EN A ALARM 000002ALARM PreviousNext |