GENERAL SET486 EnglishSETTINGSz Network control is only possible when “NETWORKCONTROL” has been set to “ON”.z In order to prevent network control while the digitalvideo recorder is connected to a network, set“NETWORK CONTROL” to “OFF”.The following settings are carried out using the shuttledial and jog dial.z Vertical cursor movement: Turn the jog dial.z Cursor movement to the right: Turn the shuttle dialclockwise.z Modification of values : Turn the shuttle dial clockwise,and then with the setting value flashing, turn the jogdial.z Confirmation of values : Turn the shuttle dial clockwise.6 Set “IP ADDRESS”.(Default setting: 192. 168. 0. 1)7 Set “SUBNET MASK”.(Default setting: 255. 255. 255. 0)8 Set “GATEWAY”.(Default setting: 0. 0. 0. 0)9 Set “PORT”.(Default setting: 00080)When connecting the digital video recorder to a network,check the following settings with the network administrator.z IP ADDRESSz SUBNET MASKz GATEWAYz PORTThree access levels are setup for network connection, anda password is set for each. Passwords comprise between4 and 8 alphanumeric characters.z “ID” or “PASSWORD (4-8)” at the top of the screen isthe screen title. You cannot move the cursor to thisitem.Example:Setting “AB123456” to “ID1”1 Turn the jog dial to select “ID 1”.[Settings]2 Turn the shuttle dial clockwise.The first password entry item “1” flashes.Characters that can be entered in passwords: 0 to 9, A to ZSetting passwords for the networkSetting Description Default settingID1 Allows video to be monitored viathe network. 1111----ID2Allows video to be monitored andthe playback or search/playback ofrecordings via the network.2222----ID3Allows all of this recorder’soperations and settings to beperformed.3333----
