RECORD SET358 EnglishSETTINGS13 Press the [EXIT] button.The setting procedure is ended and the display returns tothe normal screen.z The recording rate is automatically calculated based onrecording settings and the number of connectedcameras, and this is indicated by “REC RATE”. Allcameras will record at this rate. If a valid figure cannotbe calculated, “ERROR!” will be displayed.z When easy setup settings and individual settings areboth set, the most recent settings override previoussettings.z Easy setup settings cannot be used with programrecording or day-specific timer recording.4 Turn the jog dial to select “REC RATEBASE”, and then turn the shuttle dialclockwise.The screen is displayed with thecursor positioned on “REC RATE”.The number of detected cameras is indicated by“NUMBER OF CAMERAS”.z Confirm that the number of cameras connected to thedigital video recorder is the same as the number ofdisplayed recording cameras. If this is not the case,check the wiring between cameras and the digital videorecorder and then carry out “CAMERA DETECT”.(JP.48)5 Turn the shuttle dial clockwise.“25.000” flashes.6 Turn the jog dial to select “REC RATE”,and then turn the shuttle dial clockwise.Set the recording rate for each individual camera.The cursor moves to “TIMER RECORDING (DLY)”.7 Turn the shuttle dial clockwise.“OFF” flashes.8 To activate timer operation, turn the jogdial to select “ON”, and then turn theshuttle dial clockwise.The cursor moves to “START”.If timer recording has been set to “ON”, the timer’s“START” and “STOP” should now be set.Setting based on recording rateEXIT
