RECORD SET368 EnglishSETTINGS4 Turn the jog dial to set “SUN” to “DLY”,and then turn the shuttle dial clockwise.The start time flashes as “--:--”.5 Repeat steps 3 and 4 to set theremaining items using the shuttle dialand jog dial. To change a displayed setting itemTurn the shuttle dial in the required direction to selectthe item to be changed, and then turn the jog dial tochange the setting. Picture quality and recording rate for timerrecordingz Picture quality is set using “PICTURE QUALITY” fromthe “4. NORMAL REC MODE SET”. (JP.64)z When program recording is set to “OFF”, the “RECRATE” from the “4. NORMAL REC MODE SET” sub-menu is used. (JP.64)6 Press the [EXIT] button when all of thenecessary settings have been made.The display returns to the normal screen. To set different recording times and/orrecording rates for each day of the weekSet the desired recording times and recording rate foreach day.z If specific days are set as holidays, the operation forSunday will be used on those days also. (JP.50)z If timer settings overlap, recording is performed in thefollowing sequence.Each daily reservation → DLY → EXTPriority (high) ←−−−−−−−−−−−−→ (low)z If a reservation for a particular day overlaps with a dailyreservation, priority is given to that with the earliest starttime. If both have the same start time, priority is given tothat with the highest setting position in the menu.1 Press the [MENU RESET] button withthe screen displayed.All setting items are cleared.Use the following procedures to set timer recordingsspanning more than 24 hours. The 7th (SAT) and 8th(DLY) lines from the screen are used forthis purpose.Example:Timer recording from 10:30 on Monday to 20:30 onWednesday with a recording rate of 5 FPS.1 Turn the jog dial to select line 7 (SAT),and then turn the shuttle dial clockwise.“SAT” from the “WEEK” column flashes.You can change the setting of the flashing item.EXITTo cancel all set timer reservationsTimer reservations spanning more than 24hours[MENU RESET] buttonLine 7