RECORD SET3English 61The following settings are carried out using the shuttledial and jog dial.z Vertical cursor movement: Turn the jog dial.z Cursor movement to the right: Turn the shuttle dialclockwise.z Modification of values: Turn the shuttle dial clockwise,and then with the setting value flashing, turn the jogdial.z Confirmation of values: Turn the shuttle dial clockwise.3 Set “ALARM RECORDING AREA” to 49%.4 Move the cursor to “AREA FULL RESET”.5 Turn the shuttle dial clockwise. screen is displayed. The screen contains amessage regarding initialization of the hard disk.6 To change the recording area, turn thejog dial to display “YES”.z If the shuttle dial is turned clockwise while “NO” isselected, the screen willbe displayed and the recording capacities will revert totheir previous settings. In other words, the new settingswill not be adopted.7 Turn the shuttle dial clockwise.(1) The hard disk is initialized.(2) The screen appears and themodified recording capacities are adopted.8 Press the [EXIT] button.The setting procedure is ended and the display returns tothe normal screen.By default, when all of the space in the hard disk’s normalrecording area and alarm recording area has been usedup, repetitive overwriting is automatically started (resultingin the older data being replaced).However, it may be desirable to prevent overwriting insuch a case when recorded video is to be checked. To dothis, follow the procedure described below to allow only asingle overwrite for each recording area.1 Set the items in “Setting normalrecording area overwriting anddisplaying the remaining capacity onthe operation display area”. (JP.62)The remaining hard disk capacity is displayed, andsimultaneously either the FULL indicator or the ALARMFULL indicator will begin to flash.Setting overwrite permissionEXIT