|
RECORD SET376 EnglishSETTINGS14 Set “LEVEL” and “MODE” for T-2through T-4 using the same procedure(i.e., steps 8 through 13).z Motion sensor positions are common for T-1 throughT-4, and different settings cannot be made.15 Turn the shuttle dial counter-clockwise.Motion sensor settings are confirmed and the REC MODE SET> screen is displayed once again. To stop motion sensor recordingSet the sensitivity level from the motion sensor settingscreen to “OFF”.z The period for “T-1” through “T-4” as set in step 9changes to that of “TIME PERIOD A” or “TIME PERIODB” on P.52.z The sensitivity level can be checked using the settingscreen. When motion is detected, the sensor colorchanges from green to red, and a buzzer is sounded.If detection is too sensitive, an alarm can be triggeredeven by slight changes in lighting; accordingly, thesensitivity level should be set to match the cameralocation.1 Press the [MENU] button and turn thejog dial to select “2. RECORD SET”, andthen turn the shuttle dial.The screen is displayed.2 Turn the jog dial to select “8. ALARMOPERATION SET”, and then turn theshuttle dial clockwise.The screen is displayed withthe cursor positioned on “ALARM RETRIGGER”.3 Turn the shuttle dial clockwise.“OFF” flashes in the “ALARM RETRIGGER” field.4 Turn the jog dial to set the alarm triggerto “ON”, and then turn the shuttle dialclockwise.The cursor moves to “MAIN MON. DISPLAY”.[Settings] ( indicates default setting)Setting alarm operation and displayMENUSetting DescriptionOFFEven if a new alarm is received on the samechannel during alarm recording, the duration is notextended.ONIf a new alarm is received on the same channelduring alarm recording, the duration is extended andboth alarms are treated as one. (Example: Input inthe alarm sequence A → C) However, if the newalarm is on a different channel, the alarms aretreated separately. (Example: Input in the alarmsequence A → B → C)CH1CH2AlarmAlarmAlarm Recording AExample:AlarmAlarm Recording CAlarm Recording B PreviousNext |