Sanyo DSR-3506P Instruction Manual

Also see for DSR-3506P: Service manual Quick guide

Contents

SCREEN SET5English 934 Turn the shuttle dial clockwise.“T-1” starts to flash for the time period.5 Turn the jog dial to select T-1, T-2, T-3,or T-4 for the time period, and then turnthe shuttle dial clockwise.After setting the period, the cursor moves to channel 01 forthe “MAIN MON.”.6 Turn the jog dial clockwise or counter-clockwise to move the cursor to themain-monitor or monitor 2 channel to bechanged.7 Turn the shuttle dial clockwise.“ON” flashes.8 Turn the jog dial to select “ON” or“OFF”, and then turn the shuttle dialclockwise.After confirming this setting, the cursor moves one positionto the right.9 Use the same procedure to set theremaining channels.10 Press the [EXIT] button.The setting procedure is ended and the display returns tothe normal screen.z When setting a number of time periods together, usethe jog dial to move the cursor to the next period aftercompleting step 9, and repeat the process from step 4.z The time period for “T-1” through “T-4” changes to thatof “TIME PERIOD A” or “TIME PERIOD B” on P.52.EXIT