Sanyo DSR-3506P Instruction Manual

Also see for DSR-3506P: Service manual Quick guide

Contents

RECORD SET3English 65z Audio recording can only be specified when “RECRATE” is between A50 and A1 FPS.z When set to “ON”, the letter “A (indicating that audio willbe recorded)” is displayed in front of the recording rate.As both video and audio will be stored in the normalrecording area, this area’s overall capacity will reduceaccordingly.z Audio will only be output during playback at the samerate as recording.z Audio and video may be slightly out of synchrony incertain situations.7 Set “REC RATE”.(Default setting: 12.5 FPS)(Example: 6.25)Allowable recording time is dependent on the setting madefor “PICTURE QUALITY”. For more details, see the “Tableof recording rate and times” (JP.105).z When pre-alarm recording is set to “ON”, the recordingrate is limited to 25 FPS (and a setting of 50 FPScannot be made).8 Set “REC PROGRAM GROUP”.See (JP.65) for more details regarding programrecording.(Example: P-1)[Settings] ( indicates default setting)9 Press the [EXIT] button.The setting procedure is ended and the display returns tothe normal screen.Use the following procedure to record from specifiedcameras. A total of four programs (No. 1 through No. 4)can be setup for this purpose. For example, Program No. 1could be setup to record from cameras No. 1 through No. 4only, whereas Program No. 2 could be setup to recordfrom cameras No. 3 through No. 6. In addition, theseprograms can also be used for timer recording.z Even if audio recording is set to “ON” using the screen, certain settingsfor program recording may make it impossible for audioto be recorded. When audio is to be recorded, you arerecommended to do a trial recording first of all toconfirm that this is possible.Example:Setting Program No. 1 to record video from cameras No. 1through No. 3(1) PROGRAMSelects Program No. 1 through Program No. 4.(2) SELECT INDIVIDUAL CAMERA RATESets which of the connected cameras (1 through 6) torecord from. Recording rates can also be set for eachcamera.1 Press the [MENU] button, turn the jogdial to select “2. RECORD SET”, andthen turn the shuttle dial clockwise.The screen is displayed.Setting DescriptionOFF Video from all cameras is recording at the same rate.P-1 Used when recording with Program No. 1.P-2 Used when recording with Program No. 2.P-3 Used when recording with Program No. 3.P-4 Used when recording with Program No. 4.Allowable recordingtimeEXITSetting program recording(1)(2)MENU