Sanyo PLC-EF31N Owner's Manual

Also see for PLC-EF31: Service manual Service manual

Contents

19BEFORE OPERATIONHOW TO OPERATE ON-SCREEN MENUFLOW OF ON-SCREEN MENU OPERATIONDisplay ON-SCREEN MENUPress MENU button to display ON-SCREEN MENU (MENUBAR). A red frame is POINTER.Move POINTER (red frame) to MENU ICON that you want toselect by pressing POINT RIGHT / LEFT buttons.Adjust ITEM DATA by pressing POINT RIGHT / LEFTbuttons.Refer to following pages for details of respectiveadjustments.Press POINT DOWN button and move POINTER (red frameor red arrow) to ITEM that you want to adjust, and then pressSELECT button to show ITEM DATA.Select Menu to be adjustedControl or adjust item through ON-SCREEN MENU1243You can control and adjust this projector through ON-SCREENMENU. Refer to following pages to operate each adjustment onON-SCREEN MENU.2 MOVING POINTER3 SELECT ITEMMove pointer (✽ see below) or adjust value of item by pressingPOINT button(s) on Top Control or on Remote Control Unit.Select item or set selected function by pressing SELECT button.OPERATING ON-SCREEN MENU✽ Pointer is a icon on ON-SCREEN MENU to select item. See fig-ures on section "FLOW OF ON-SCREEN MENU OPERATION"below.ON -- OFFMENUINPUTSELECTLENSSHIFTVOLUMEIMAGEFOCUSUTOC ADJ.OOMUsed to select item.SELECT BUTTONUsed to move PointerUP/ DOWN/ RIGHT/LEFT.POINT BUTTONSTOP CONTROL1 DISPLAY MENUPress MENU button to display ON-SCREEN MENU.Used to select item.SELECT BUTTONUsed to move PointerUP/ DOWN/ RIGHT/LEFT.POINT BUTTONWIRELESS REMOTE CONTROLMENU BARPOINTER(red frame)MENU ICONITEM DATAPress POINT LEFT/RIGHTbuttons to adjust value orset function.SELECTBUTTONPOINTER (red frame)Press POINT DOWN button tomove POINTER.ITEM