Sanyo PLC-EF31N Owner's Manual

Also see for PLC-EF31: Service manual Service manual

Contents

7PREPARATIONNAME OF EACH PART OF PROJECTORBOTTOMBACKHOT AIR EXHAUSTED !Air blown from exhaust vent is hot. Whenusing or installing a projector, followingprecautions should be taken. Do not put a flammable object near this vent. Keep rear grills at least 3’ (1m) away fromany object, especially heat-sensitive object. Do not touch this area, especially screwsand metallic parts. This area will becomehot while a projector is used.This projector detects internal temperatureand automatically controls operating powerof Cooling Fans.FRONTLAMPCOVERThis projector is equipped with coolingfans for protection from overheating.Pay attention to following to ensureproper ventilation and avoid a possiblerisk of fire and malfunction. Do not cover vent slots. Keep bottom clear of any objects.Obstructions may block cooling air.AIR INTAKE VENTSPROJECTION LENSSPEAKERSINFRAREDREMOTE RECEIVERLENS COVERPOWER CORDCONNECTOREXHAUST VENTMAIN ON / OFFSWITCHINFRAREDREMOTE RECEIVERCARRYING HANDLEADJUSTABLE FEETAIR INTAKE VENTDo not turn on a projector with lens coverattached. High temperature from light beam maydamage lens cover and result in fire hazard.CAUTIONAIR INTAKEVENTEXHAUST VENTEXHAUST VENT