Sanyo PLC-EF31N Owner's Manual

Also see for PLC-EF31: Service manual Service manual

Contents

2CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.THIS SYMBOL INDICATES THAT DANGEROUSVOLTAGE CONSTITUTING A RISK OF ELECTRICSHOCK IS PRESENT WITHIN THIS UNIT.THIS SYMBOL INDICATES THAT THERE ARE IMPORTANTOPERATING AND MAINTENANCE INSTRUCTIONS IN THEOWNER'S MANUAL WITH THIS UNIT.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENBefore operating this projector, read this manual thoroughly and operate the projector properly.This projector provides many convenient features and functions. Operating the projector properly enables you tomanage those features and maintains it in better condition for a considerable time.Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or otheraccidents.If your projector seems to operate improperly, read this manual again, check operations and cable connections and trythe solutions in the “Trouble-shooting” section of the end of this booklet. If the problem still persists, contact the salesdealer where you purchased the projector or the service center.TO THE OWNERSAFETY PRECAUTIONSWARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TORAIN OR MOISTURE. This projector produces intense light from the projection lens. Do not stare directly into the lens as possible.Eye damage could result. Be especially careful that children do not stare directly into the beam. This projector should be set in the way indicated. If not, it may result in a fire hazard. Take appropriate space on the top, sides and rear of the projectorcabinet for allowing air circulation and cooling the projector.Minimum distance should be taken. If the projector is to be builtinto a compartment or similarly enclosed, the minimum distancesmust be maintained. Do not cover the ventilation slot on theprojector. Heat build-up can reduce the service life of yourprojector, and can also be dangerous. Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilationholes. Remote Control Unit, supplied to this projector, emits the laser beam as the laser pointer function from LaserLight Window while pressing LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicatelaser emission). Do not look into Laser Light Window or shine the laser beam on yourself or other people. Eyedamage may result. If the projector is not to be used for an extended time, unplug the projector from the power outlet.READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.20cm50cm 50cm 1mSIDE and TOP REAR