Sanyo PLC-EF31N Owner's Manual

Also see for PLC-EF31: Service manual Service manual

Contents

25COMPUTER INPUTPress MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Press POINT DOWN button and a red-arrow icon will appear.Move arrow to "RGB", and then press SELECT button.13When connect a computer output [5 BNC Type (Red, Green, Blue,Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb, H/HVand V jacks.WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )SELECTING COMPUTER SYSTEMWHEN SELECT INPUT 1 (DVI INPUT TERMINAL )Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Press POINT DOWN button to move a red arrow pointer to Input1 and then press SELECT button. Source Select Menu willappear.12Input 1INPUT MENUMove a pointer to either Digital or Analog and then pressSELECT button.3When digital signal is connected on DVI terminal, selectDigital.DigitalWhen analog signal is connected on DVI terminal, selectAnalog.AnalogSELECTING INPUT SOURCEMENU OPERATIONINPUT 3DIRECT OPERATIONSelect INPUT source by pressing INPUT 1/2 and INPUT 3buttons on Remote Control Unit.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to select Input and press SELECTbutton. Another dialog box INPUT SELECT Menu will appear.Press POINT DOWN button and a red-arrow icon will appear.Move arrow to INPUT source that you want to select, and thenpress SELECT button.12INPUT 1/2 buttonINPUT 1INPUT 2INPUT 3 buttonINPUT 1INPUT 2INPUT 3Select INPUT source by pressing INPUT / button on TopControl.INPUT / buttonsMove a pointer to Digital orAnalog and press SELECTbutton.Move a pointer (red arrow) toInput 1 and press SELECTbutton.INPUT Menu iconSource Select MenuInput 2INPUT MENUMove a pointer to RGB andpress SELECT button.INPUT Menu iconMove a pointer (red arrow) toInput 2 and press SELECTbutton.Source Select MenuINPUT Menu iconPress POINT DOWN button to move a red arrow pointer to Input2 and then press SELECT button. Source Select Menu willappear.2