Sanyo PLC-EF31N Owner's Manual

Also see for PLC-EF31: Service manual Service manual

Contents

29COMPUTER INPUTMANUAL PC ADJUSTMENTThis projector can automatically tune to display signals from most personal computers currently distributed. However, somecomputers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan systemof this projector. If this happens, projector cannot reproduce a proper image and image may be recognized as a flickeringpicture, a non-synchronized picture, a non-centered picture or a skewed picture.This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those specialsignal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. Thisenables you to recall setting for a specific computer whenever you use it.Note : This PC ADJUST Menu cannot be operated in Digital Signal input on DVI terminal and “RGB” is selected on PCSYSTEM MENU (P26).Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer to PCADJUST Menu icon.12 Press POINT DOWN button to move a red frame pointer to itemthat you want to adjust and then press SELECT button.Adjustment dialog box will appear. Press POINT LEFT/RIGHTbutton to adjust value. Move a red frame icon to item and pressSELECT button.PC ADJUST MENUPC ADJUST Menu iconAdjusts an image as necessary to eliminate flicker from display.Press POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)Fine syncNumber of total dots in one horizontal period. Press POINTLEFT/RIGHT button(s) and adjust number to match your PC image.Total dotsAdjusts horizontal picture position. Press POINT LEFT/RIGHTbutton(s) to adjust position.HorizontalAdjusts vertical picture position. Press POINT LEFT/RIGHTbutton(s) to adjust position.VerticalPress SELECT button to show information of computer selected.Current modeAdjusts clamp position. When a image has a dark bar(s), try thisadjustment.ClampPress SELECT button at this icon toadjust “Clamp,” “Display area (H/V)” orset “Full screen.”Press POINT LEFT/RIGHTbutton to adjust value.Shows status(Stored / Free) ofselected Mode.Selected ModePress SELECT button atCurrent mode icon to showinformation of computerconnected.Current mode