Sanyo PLC-EF31N Owner's Manual

Also see for PLC-EF31: Service manual Service manual

Contents

22KEYSTONE ADJUSTMENT1 Press KEYSTONE / button on Remote Control Unit or selectKeystone on SETTING menu. (Refer to page 39.) Keystonedialog box appears.2 Correct keystone distortion by pressing KEYSTONE / buttonor POINT UP/DOWN button(s). Press KEYSTONE button orPOINT UP button to reduce upper part of image, and pressKEYSTONE button or POINT DOWN button to reduce lowerpart.Reduce upper width with KEY STONE button orPOINT UP button.Reduce lower width with KEY STONE button orPOINT DOWN button.If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.ADJUSTING SCREENMessage disappears after 4 seconds.Message disappears after 4 seconds.ZoomFocusZOOM ADJUSTMENTFOCUS ADJUSTMENT1 Press ZOOM / button on Top Control or on Remote ControlUnit. Message “Zoom” is displayed.2 Press ZOOM button to make image larger, and press ZOOM button to make image smaller.1 Press FOCUS / button on Top Control or on Remote ControlUnit. Message “Focus” is displayed.2 Adjust focus of image by pressing FOCUS / button(s) .BASIC OPERATIONMessage disappears after 4 seconds.Lens shiftLENS SHIFT ADJUSTMENT1 Press LENS SHIFT button on Top Control or on Remote ControlUnit. Message “Lens shift” is displayed.2 Press POINT UP button to move image up, press POINT DOWNbutton to move image down.