Sanyo PLC-EF31N Owner's Manual

Also see for PLC-EF31: Service manual Service manual

Contents

32COMPUTER INPUTPress POINT LEFT/RIGHT buttonsto adjust value.Reset all adjustment to previous figure.ResetStoreCloses IMAGE MENU.QuitOther icons operates as follows.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer toIMAGE ADJUST Menu icon.12 Press POINT DOWN button to move a red frame pointer to itemthat you want to adjust and then press SELECT button. Level ofeach item is displayed. Adjust each level by pressing POINTLEFT/RIGHT button(s).Move a red frame pointer toitem to be selected and thenpress SELECT button.IMAGE ADJUST MENUIMAGE LEVEL ADJUSTMENTPress POINT LEFT button to decrease contrast, and POINT RIGHTbutton to increase contrast. (From 0 to 63.)Press POINT LEFT button to adjust image darker, and POINTRIGHT button to adjust brighter. (From 0 to 63.)ContrastBrightnessPress either POINT LEFT button or POINT RIGHT button to obtainbetter balance of contrast. (From 0 to 15.)Gamma3To store manually preset image, move a red frame pointer toStore icon and press SELECT button. Image Level Menu willappear. Move a red frame pointer to Image 1 to 4 where youwant to set and then press SELECT button.Image Level MenuMove a red frame pointer to anyof Image 1 to 4 where you wantto set and then press SELECTbutton.Store iconPress SELECT button at this icon tostore adjustment.IMAGE ADJUSTMenu iconPress POINT LEFT button to lighten red tone and POINT RIGHTbutton to deeper tone. (From 0 to 63.)White balance (Red)Press POINT LEFT button to lighten green tone and POINT RIGHTbutton to deeper tone. (From 0 to 63.)White balance (Green)Press POINT LEFT button to lighten blue tone and POINT RIGHTbutton to deeper tone. (From 0 to 63.)White balance (Blue)Selected Image levelPress POINT LEFT button to soften image, and POINT RIGHTbutton to sharpen image. (From 0 to 15.)SharpnessProgressivePress POINT LEFT/RIGHT button(s) to change progressive scanmode. Dialog box display is changed to “Off” and progressive scanmode to off. Press POINT LEFT/RIGHT button(s) again, progressivescan mode to on.NOTE :Color temp.Press either POINT LEFT button or POINT RIGHT button to Colortemp. level that you want to select. (XLow, Low, Mid or High) Progressive can be operated when “RGB”,“1035i (HDTV)”, “1080i50 (HDTV)” or “1080i60(HDTV)” is selected on PC SYSTEM MENU(P26) only.