Sanyo PLC-WU3800 Owner's Manual

Also see for PLC-WU3800: Dimensional drawing Manual Manual Command list Specification sheet

Contents

11Part Names and FunctionsTop Controlᶌ LAMP REPLACE indicatorLights yellow when the projection lamp reaches itsend of life (pp.65, 73).ᶈ WARNING indicator–Lights red when the projector detects an abnormalcondition.–Blinks red when the internal temperature of theprojector exceeds the operating range (pp.62, 73).ᶋ ON/STAND–By buttonTurn the projector on or off (pp.19-21).ᶇ POWER indicator–Lights red when the projector is in stand-by mode.–Lights green during operations.–Blinks green in the Power management mode(p.53).ᶊ INPUT buttonSelect an input source (pp.28-29, 38-39).ᶅ MENU buttonOpen or close the On-Screen Menu (p.22).ᶄ POINT ŸźŻŹ (VOLUME +/–) buttons–Select an item or adjust the value in the On-ScreenMenu (p.22).–Pan the image in the Digital zoom + mode (p.37).–Adjust the volume level (Point ŻŹ buttons) (p.25).ᶆ AUTO SETUP button–Execute the setting of Auto setup (includes Inputsearch, Auto PC adj. and Auto Keystone functions)in the setting menu (pp.24, 46).ᶃ SELECT button–Execute the selected item (p.22).–Expand or compress the image in the Digital zoommode (p.37).ᶃᶄᶅᶆᶇᶈᶉᶊᶋᶌᶉ KEySTONE buttonCorrect keystone distortion (pp.24, 47).