8Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER 1 button on theremote control.1Input Menu3Input Source Selection (Computer 1: RGB / Component / RGB(Scart) )Computer InputPNote:When the Input Search function is set to On1 or On inthe Auto setup function, the input signal will be searchedautomatically (p.46).Computer1Top Control INPUT buttonDirect OperationMenu OperationPress the MENU button to display the On-ScreenMenu. Use the Point Ÿź buttons to select Input andthen press the Point Ź or the SELECT button.Use the Point Ÿź buttons to select Computer 1 andthen press the Point Ź button to access the submenuitems.When Computer 1 is selected, use the Point Ÿźbuttons to select RGB and then press the SELECTbutton.COMPUTER 1 buttonRemote ControlComputer 1(RGB)Computer 1(Scart)Computer 1HDMIComputer ⁄S-videoVideo⁄ COMPUTER can not be selected when using the COMPUTER IN 2/MONITOR OUT terminal as MONITOR OUT output.
