Sanyo PLC-WU3800 Owner's Manual

Also see for PLC-WU3800: Dimensional drawing Manual Manual Command list Specification sheet

Contents

41Image Select MenuSelect the desired image mode among Dynamic, Standard,Cinema, Blackboard (Green), Colorboard, Image 1,Image , Image 3 and Image 4 by pressing the IMAGEbutton on the remote control.StandardPicture mode adjusted with fine tone.CinemaBlackboard (Green)Image 1–4IMAGE buttonDynamicCinemaImage Mode SelectionBlackboard (Green)DynamicStandardRemote ControlIMAGE buttonDirect OperationFor viewing pictures in a bright room.Normal picture mode preset on the projector.For viewing with the user preset image mode in the Imageadjust Menu (see pages 42-43). This Image memory isprovided in each computer, component and video inputsource.1Menu Operation Image 1Image Image 3Image 4ColorboardColorboardUse the Point Ÿź buttons to select Colorboard and thenpress the Point Ź or the SELECT button. Use the PointŸź buttons to select the desired item and then press theSELECT button.At the time of simple projection on the colored wall, youcan get the close color image to the color image projectedon a white screen by selecting the similar color to the wallcolor from the preset four colors.Press the MENU button to display the On-Screen Menu.Use the Point Ÿź buttons to select Image select andthen press the Point Ź or the SELECT button.Use the Point Ÿź buttons to select the desired itemand then press the SELECT button.Video InputFor the image projected on a blackboard.This mode helps enhance the image projected on ablackboard. This is mainly effective on a green coloredboard, not truly effective on a black colored board.