Sanyo PLC-WU3800 Owner's Manual

Also see for PLC-WU3800: Dimensional drawing Manual Manual Command list Specification sheet

Contents

51SettingCeilingRearCeilingWhen this function is set to On, the picture will be top/bottom and left/right reversed. This function is used toproject the image from a ceiling-mounted projector.RearWhen this function is set to On, the picture will be left/rightreversed. This function is used to project the image fromrear of the screen.HDMI setup HDMI setupThis function is only used for HDMI input source.ImageSelect Normal or Enhanced to match the video rangesetting of your HDMI Digital RGB equipment.SoundHDMI: When using the HDMI cable, select HDMI.Both video and audio are transferred and youneed not to connect any additional cables foraudio.Computer : When using the DVI-HDMI cable, selectComputer 2 and connect the audio cableto COMPUTER IN 2 termimal.The names for the output setting of Digital R/G/B varyfrom equipment to equipment. For details, refer to theowner’s manual of your Digital R/G/B equipment.When the black parts of the image are destroyed or standout, please switch to Normal or Enhanced, and then switchthe output type of the HDMI Digital R/G/B output equipment.TerminalThe COMPUTER IN 2/MONITOR OUT terminal on the backof the projector is switchable for computer 2 input or monitoroutput. (See page 10)Computer . . . Computer inputMonitor out . . . Monitor outTerminal function is not available when selecting Computer to the input source. Change the input source to the others(HDMI or Computer 1 or Video) so that the Terminalfunction will be available. (pp.28-29, 38-39)