Sanyo PLC-WU3800 Owner's Manual

Also see for PLC-WU3800: Dimensional drawing Manual Manual Command list Specification sheet

Contents

49CaptureCaptureThis function enables you to capture an image beingprojected to use it for a starting-up display or interval ofpresentations.Select Capture and press the SELECT button.A confirmation box appears and select yes to capture theprojected image.After capturing the projected image, go to the Logo selectfunction and set it to User. Then the captured image will bedisplayed the next time you turn on the projector or whenyou press the NO SHOW button (see page 27).To cancel the capture function, select yes in the "Quit?"confirmation box.PNote:• Before capturing an image, select Standard in theImage Select Menu to capture a proper image (pp.34,41).• The output image resolution from a computer can besupported up to the panel resolution (1280 x 800).• When capturing the image that has been adjusted bythe Keystone function, the adjusted data is automaticallyreset and the projector captures an image withoutkeystone correction.• When Logo PIN code lock is set to On, capture cannotbe selected.• When starting to capture a new image, the previouslystored image is cleared even if you cancel the capturing.• When there is no captured image or it is interruptedwhile capturing an image, User cannot be selected, youcan only switch between Default and Off.Logo PIN code lockThis function prevents an unauthorized person fromchanging the screen logo.Off ........... The screen logo can be changed freely fromthe Logo Menu (p.48).On ........... The screen logo cannot be changed without aLogo PIN code.If you want to change the Logo PIN code lock setting,press the SELECT button and the Logo PIN code dialogbox appears. Enter a Logo PIN code by following the stepsbelow. The initial Logo PIN code is set to "4321 at thefactory.Logo PIN code lockSetting