Sanyo PLC-WU3800 Owner's Manual

Also see for PLC-WU3800: Dimensional drawing Manual Manual Command list Specification sheet

Contents

3Main MenuFor detailed functions of each menu, see “Menu Tree” on pages 71-72.Basic OperationjklmnopqMain Menu Sub-Menursl Image selectFor computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboardand image 1 - 4 (p.34).For HDMI or Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) ,Colorboard and Image 1- 4 (p.41).m Image adjustFor computer source, used to adjust computer image [Contrast, Brightness, Color temp., White balance (R/G/B),Sharpness and Gamma] (pp.35-36).For HDMI or Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp., Whitebalance (R/G/B), Sharpness, Gamma, Noise reduction and Progressive] (pp.42-43).k PC adjustSelect Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust theparameters to match with the PC input signal format (p.31-33).n ScreenFor computer source, used to adjust size of the image [ Normal, True, Full, Custom and Digital zoom +/–] (pp.36-37).For HDMI or Video source, used to set size of image [Normal, Full, Zoom, Wide, Natural wide and Custom] (p.44).j InputUsed to select an input source from Computer 1, Computer , HDMI, Video, or S-video (pp.28-29,38-39).o SoundUsed to adjust the volume or mute the sound (p.25).q InformationDisplay the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lampcounter, Power management, Key lock, PIN code lock and Remote control (p.61).s GuideThe key operation is displayed.p SettingUsed to set the projector’s operating configurations (pp.45-60).r NetworkSee the owner’s manual of “Network Set-up and Operation”.