Sanyo PLC-WU3800 Owner's Manual

Also see for PLC-WU3800: Dimensional drawing Manual Manual Command list Specification sheet

Contents

4Video InputImage Adjustment1Press the Point Ż button to decrease the contrast; press thePoint Ź button to increase the contrast (from 0 to 63).Press the Point Ż button to decrease the brightness; pressthe Point Ź button to increase the brightness (from 0 to 63).ContrastBrightnessPress the Point Ż button to lighten red tone; press the PointŹ button to deepen red tone (from 0 to 63).White balance (Red)Press the Point Ż button to lighten green tone; press thePoint Ź button to deepen green tone (from 0 to 63).White balance (Green)Press the Point Ż button to lighten blue tone; press the PointŹ button to deepen blue tone (from 0 to 63).White balance (Blue)Use the Point ŻŹ buttons to select the desired Color temp.level (XLow, Low, Mid or High ).Color temp.Press the Point Ż button decrease the intensity of the color;press the Point Źbutton increase the intensity of the color(from 0 to 63).Press the Point ŻŹ buttons to adjust the tint value to get aproper color balance (from 0 to 63).ColorTintPNote:• When White balance Red, Green or Blue is adjusted, the Color temp. level will change to User.• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.40).• When Blackboard(Green) or Colorboard is selected in Image select, Color temp. will change toBlackboard or Colorboard.Image adjust MenuPress the MENU button to display the On-ScreenMenu. Use the Point Ÿź buttons to select Imageadjust and then press the Point Ź or the SELECTbutton.Use the Point Ÿź buttons select the desired itemand then press the SELECT button to display theadjustment dialog box. Use the Point ŻŹ buttons toadjust the setting value.Use the Point ŻŹbuttons to adjust thesetting value.Selected Image mode