Sanyo PLC-XE45 Owner's Manual

Also see for Think GAIA PLC-XE45: Technical details Service manual

Contents

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Verticalpositions to conform to your computer.Move the red frame pointer to theAuto PC Adj. item and press theSELECT button.“Please wait...” appears while AutoPC adjustment is in process.PC Adjust MenuPC Adjust Menu iconTo store the adjusted parametersThe system parameters adjusted in the Auto PC Adjustmentcan be stored in the projector. Once parameters are stored,the setting can be done just by selecting a Mode in the PCSystem Menu (p.26). See “Store” on page 29, for details.✔Note:• Fine sync, Total dots, Horizontal, and Vertical positions ofsome computers cannot be fully adjusted with this AutoPC Adjustment function. When the image is not providedproperly with this operation, manual adjustments arerequired (pp.28–29).• The Auto PC Adjustment cannot be operated when 480i,575i, 480p, 575p, 720p,1035i, or 1080i is selected in thePC System Menu (p.26).Auto PC AdjustmentPress the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to PC Adjust Menu.12 Use the Point ed buttons to move the red framepointer to Auto PC Adj. and then press the SELECTbutton twice.Auto PC Adj.Menu OperationThe Auto PC adjustment function can be operated directlywith the AUTO PC button on the remote control.Remote ControlAUTO PC buttonDirect Operation27Computer Input