Sanyo PLC-XE45 Owner's Manual

Also see for Think GAIA PLC-XE45: Technical details Service manual

Contents

Press the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the AV System Menu icon.1Video System SelectionAV System Menu (Video or S-Video)AV System Menu (Component)Use the Point ed buttons to move the red arrowpointer to the desired system and then press theSELECT button.2If the projector cannot reproduce proper video image,select a specific broadcast signal format from among PAL,SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.Move the pointer to thedesired system and pressthe SELECT button.PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-NThe projector automatically detects an incoming videosignal, and adjusts itself to optimize its performance.If the projector cannot reproduce proper video image, selecta specific component video signal format from among 480i,575i, 480p, 575p, 720p, 1035i, and 1080i.AutoCOMPONENT VIDEO SIGNAL FORMATVideo or S-VideoComponentThe projector automatically detects an incoming videosystem, and adjusts itself to optimize its performance.When Video System is PAL-M or PAL-N, select the systemmanually.AutoAV System Menu iconThe selected system isdisplayed.Move the pointer to thedesired system and pressthe SELECT button.AV System Menu iconThe selected system isdisplayed.✔Note:• The AV System Menu cannot be selected when selectingRGB (Scart).36Video Input