Sanyo PLC-XE45 Owner's Manual

Also see for Think GAIA PLC-XE45: Technical details Service manual

Contents

To store the adjusted data, select Store and press theSELECT button. Select a level from Image 1 to 4 withthe Point ed buttons and press the SELECT button. Aconfirmation box appears and then select “Yes.”Stored data can be called up by selecting “Image” in theImage Level Selection on page 37.Image Level MenuMove the red frame pointer toan image item to be set andthen press the SELECT button.To reset the adjusted data, select Reset and press theSELECT button. A confirmation box appears and then select“Yes.” All adjustments return to their previous figures.ResetStoreExit the Image Adjust Menu.Quit✔Note:• Noise reduction and Progressive cannot be selectedwhen 480p, 575p, 720p, 1035i, or 1080i is selected(p.36).StoreitemAn interlaced video signal can be displayed in a progressivepicture. Select one of the following options.Off………Disabled.L1……… For an active picture.L2……… For a still picture.Film…… For watching a film. With this function, theprojector reproduces pictures faithful to theoriginal film quality.ProgressiveNoise reductionNoise interference on the screen can be reduced. Selectone of the following options to get smoother images.Off………Disabled.L1 ……… Lower reductionL2 ……… Higher reductionA confirmation boxappears and thenselect “Yes.”Use the Point 7 8 buttons to adjust the gamma value to getbetter balance of contrast (from 0 to 15).GammaPress the Point 7 button to decrease the sharpness of theimage; press the Point 8 button to increase the sharpnessof the image (from 0 to 15).Sharpness39Video Input